Supervisory authorities

CNRS Université Paris 13

Our partners


Home > Teams > PACTM > Publications récentes

Publications récentes

by Brigitte Bacroix - published on

Articles dans des revues à comité de lecture internationales ou nationales répertoriées dans des bases de données internationales (ACL)


  • Ayadi S., Charles Y., Gaspérini M., Caron Lemaire I. and. Da Silva Botelho T., Effect of loading mode on blistering in iron submitted to plastic prestrain before hydrogen cathodic charging. Int. J. Hyd. Energ., 42, 2017, 10555-10567.
  • Charles Y., H.T. Nguyen and M. Gaspérini, Comparison of hydrogen transport through pre-deformed synthetic polycrystals and homogeneous samples by Finite Element analysis, International Journal of Hydrogen Energy, à paraitre.
  • Dufrenoy S., T. Chauveau, I. Lemaire-Caron, R. Brenner, B. Bacroix, Comparison of 2 methodologies developed for the determination of residual stresses through X-Ray diffraction: application to a textured hcp titanium alloy, Int. J. Mater. Forming, à paraître.
  • Ehlers F. J. H., M. Seydou, D. Tingaud, F. Maurel, S. Queyreau, Y. Charles. Ab initio studies of selected Al grain boundaries subjected to mixed mode loading: does shear promote breakage? MSMSE, 25 (6), 2017.
  • Charles, Y., H.T. Nguyen, and M. Gaspérini, FE simulation of the influence of plastic strain on hydrogen distribution during an U-bend test. International Journal of Mechanical Sciences, 120, 2017, 214-224.
  • Gaspérini, M., M. Dammak, and P. Franciosi, Stress estimates for particle damage in Fe-TiB2 metal matrix composites from experimental data and simulation. European Journal of Mechanics - A/Solids, 64, 2017, 85-98.
  • Maziere, M., Luis, C., Marais, A., Forest, S.,Gaspérini, M., Experimental and numerical analysis of the Luders phenomenon in simple shear, International Journal of Solids and Structures. 2017, 106-107, p305.
  • Quirós C., J. Mougenot, G. Lombardi, M. Redolfi, O. Brinza, Y. Charles, A. Michau, K. Hassouni, Blister formation and hydrogen retention in aluminium and beryllium: A modelling and experimental approach, Nuclear Materials and Energy, à paraître.
  • Spagnuolo M., Barcz K., Pfa A., Dell’Isola F., Franciosi P. “Qualitative pivot damage analysis in aluminium printed pantographic sheet : numerics and experiments”. Mechanics Research Communications, 83, 2017, 47-52.
  • Wronski, S., M. Jedrychowski, J. Tarasiuk, and B. Bacroix, Microstructure evolution of titanium after tensile and recrystallisation. Materials Science and Engineering A, 692, 2017, 113-126.
  • Zhang P., O.U. Salman, J.-Y. Zhang, G. Liu, J. Weiss, L. Truskinowsky, J. Sun, Taming intermittent plasticity at small scales, Acta Materialia, 128, 2017, 351-364.


  • Ben Osman C., S. Nowak, A. Garcia-Sanchez, Y. Charles, S. Ammar, S. Mercone and F. Mammeri Stretching induced α to β phase transformation of neat PVDF and PVDF-CoFe2O4 hybrid films: an in-situ investigation, Eur. Polym. J, 84, 2016, 602-611.
  • Dhib Z., H. Guermazi, M. Gaspérini, N. Haddar, Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: Microstructure and mechanical properties before and after welding, Materials Science and Engineering A, 656, 2016, 130-141.
  • Ehlers F., Seydou M, Tingaud D., Maurel F., Charles Y., Queyreau S., Ab initio determination of the traction-separation curve for a metal grain boundary: a critical assessment of strategies. (2016). Model. Simul. Mater. Sci. Eng. 24, 2016, 085014
  • Franciosi, P. and Y. Charles, Effective property estimates for n-phase composites with from all to none co-continuous phases. International Journal of Solids and Structures, 2016. 96, 110-125.
  • Franciosi, P. and Y. Charles, Mean Green operators and Eshelby tensors for hemispherical inclusions and hemisphere interactions in spheres. Application to bi-material spherical inclusions in isotropic spaces. Mechanics Research Communications, 75, 2016, 57-66.
  • Kahloun C., Monnet G., Queyreau S., Le L. T., Franciosi P., A comparison of collective dislocation motion from single slip quantitative topographic analysis during in-situ AFM room temperature tensile tests on Cu and Feα crystals, International Journal of Plasticity, 2016, 84, 277-298.
  • Uniwersał, A., M. Wróbel, K. Wierzbanowski, S. Wroński, M. Wroński, I. Kalemba-Rec, T. Sak, and B. Bacroix, Microstructure, texture and mechanical characteristics of asymmetrically rolled polycrystalline copper. Materials Characterization, 2016. 118, 575-583.
  • Uniwersał A., Wróbel M., Wroński S., Kalemba-Rec I., Wroński M., Wierzbanowski K., Baczmański A., Bacroix B., The Effect of Low Deformation Asymmetric Rolling on Microstructure and Texture of the Polycrystalline Copper. Archives of Metallurgy and Materials 2016, 61, 2183-2188.
  • Wronski, S. and B. Bacroix, Texture and microstructure variation in asymmetrically rolled steel. Materials Characterization, 2016. 118, 235-243.
  • Wronski, S., K. Wierzbanowski, M. Jędrychowski, J. Tarasiuk, M. Wronski, A. Baczmanski, and B. Bacroix (2016), Microstructure evolution of titanium after tensile test. Materials Science and Engineering: A, 656, 2016, 1-11.


  • Belkabazz A., B. Bacroix, R. Brenner, Investigation of the elastoplastic behavior of fcc polycrytals using a FFT numerical scheme, Ro. J. Techn. Sci. − Appl. Mechanics, 60, 2015, 5-23.
  • Bettahar, K., M. Bouabdallah, R. Badji, M. Gaceb, C. Kahloun, and B. Bacroix, Microstructure and mechanical behavior in dissimilar 13Cr/2205 stainless steel welded pipes. Materials & Design, 2015. 85, 221-229.
  • Béucia B., P Franciosi, S Queyreau, D Chaubet and B Bacroix, SEM observations of grain boundary mobility under thermal and plasticity effects, 2015 IOP Conf. Ser.: Mater. Sci. Eng. 89 012019, 36th Risø Int. Symp. On Materials Science, Sept. 07 – 11, 2015.
  • Franciosi P., Le L.T., Monnet G., Kahloun C., Chavanne M.-H., Investigation of slip system activity in iron at room temperature by SEM and AFM in-situ tensile and compression tests of iron single crystals, Int. J. Plasticity, 2015, 65, 226–249.
  • Franciosi P., Barboura S., Charles Y., Analytical mean Green operators / Eshelby tensors for patterns of coaxial finite long or flat cylinders in isotropic matrices. International Journal of Solids Structures, 2015, 66, 1-19.
  • Jedrychowski M., B Bacroix, O U Salman, J Tarasiuk and S Wronski, Investigation of SIBM driven recrystallization in alpha Zirconium based on EBSD data and Monte Carlo modeling, 2015 IOP Conf. Ser.: Mater. Sci. Eng. 89 012029, 36th Risø Int. Symp. on Materials Science, Sept. 07 – 11, 2015.
  • Nesterova E.V., Bouvier S., Bacroix B., Microstructure Evolution and Mechanical Behavior of a High Strength Dual-Phase Steel under Monotonic Loading, Materials Characterization, 2015, 100, 152–162.
  • Taloni, A., Kardash, E., Salman, O.U., Truskinovsky, L., Zapperi, S., La Porta, C.A.M. , Volume Changes During Active Shape Fluctuations in Cells, Physical Review Letters, 2015, 114, 20810.
  • Wauthier-Monnin A., Chauveau T., Castelnau O., Réglé H., Bacroix B., The evolution with strain of the stored energy in different texture components of cold-rolled IF steel revealed by high resolution X-ray diffraction, Materials Characterization, 2015, 104, 31-41.
  • Wroński M., Wierzbanowski K., Wróbel M., Wroński S., Bacroix B., Effect of Rolling Asymmetry on Selected Properties of Grade 2 Titanium Sheet, Met. Mater. Int. 21, 2015, pp. 805-814.
  • Wronski, M., K. Wierzbanowski, B. Bacroix, and P. Lipinski, Asymmetric rolling textures of aluminium studied with crystalline model implemented into FEM. IOP Conference Series: Materials Science and Engineering, 2015. 82(1): p. 012012.
  • Wronski, M., K. Wierzbanowski, S. Wronski, B. Bacroix, M. Wróbel, and A. Uniwersał, Study of texture, microstructure and mechanical properties of asymmetrically rolled aluminium. IOP Conference Series: Materials Science and Engineering, 2015. 82(1): p. 012074.
  • Wronski M., K Wierzbanowski, S Wronski and B Bacroix, Microstructure and texture of asymmetrically rolled aluminium and titanium after deformation and recrystallization, 2015 IOP Conf. Ser.: Mater. Sci. Eng. 89 012050, 36th Risø Int. Symp. On Materials Science.


  • Badji R., Kherrouba N., Mehdi B., Cheniti B., Bouabdallah M., Kahloun C., Bacroix B., Precipitation kinetics and mechanical behavior in a solution treated and aged dual phase stainless steel, Materials Chemistry and Physics, 148, 2014, 664–672.
  • Cabus C., Réglé H., Bacroix B., The influence of grain morphology on texture measured after phase transformation in multiphase steels, J. Mater. Sci. 2014, 49 : 5646-5657.
  • Charles Y., A finite element formulation to model extrinsic interfacial behavior. Finite Elements in Analysis and Design, 88, 2014, 55-66.
  • Dammak M., Gaspérini M., Barbier D., Microstructural evolution of iron based metal matrix composites submitted to simple shear, Materials Science and Engineering A 616, 2014, 123-131.
  • Dufrenoy S., Chauveau T., Brenner R., Fontugne C., Bacroix B., Modeling methodology for stress determination by XRD in polycrystalline materials, Advanced Materials Research 2014, 996 : 106-111.
  • Kahloun C., Badji R., Queyreau S., Franciosi P., Bacroix B., Spatial Convolution of a Stress Field Analyzed by X-Ray Diffraction, Advanced Materials Research, 996, 169-174.
  • Franciosi P., Mean and axial green and Eshelby tensors for an inclusion with finite cylindrical 3D shape, Mechanics Research Comm., 2014, 59 : 26-36.
  • Grégori F., Murakami K., Bacroix B., The influence of microstructural features of individual grains on texture formation by strain induced boundary migration in Non-Oriented electrical steels, J. Mater. Sci. 2014, 49 : 1764-1775.
  • Queyreau S., Marian J., Wirth B.D., Arsenlis A., Analytical integration of the forces induced by dislocations on a surface element, Modelling Simulation Mater. Sci. Eng., 2014, 22.
  • Wronski M., Wierzbanowski K., Wronski S., Bacroix B., Lipinski P., Texture variation in asymmetrically rolled titanium. Study by Finite Element Method with implemented crystalline model, Int. J. Mech. Sci. 2014, 85 : 258-267.
  • Wronski S., Wierzbanowski K., Wronski M., Bacroix B., Three dimensional analysis of asymmetric rolling with flat and inclined entry », Archives Metall. Mater. 2014, 59 : 585-591.
  • Wronski S., Bacroix B., Microstructure evolution and grain refinement in asymmetrically rolled aluminium, Acta Materialia 76, 2014, 404–412.


  • Badji, R., Chauveau, T., Bacroix, B. (2013), Texture, misorientation and mechanical anisotropy in a deformed dual phase stainless steel weld joint , Mater. Sci. Eng. A 575 : 94-103.
  • Benmhenni, N., Bouvier, S., Brenner, R., Chauveau Th., Bacroix, B. (2013), Micromechanical modelling of monotonic loading of CP alpha - Ti : Correlation between macroscopic and microscopic behaviour, Mater. Sci. Eng. A 573 : 222-233.
  • Cereceda D., A. Stukowski, M. Gilbert, S. Queyreau, L. Ventelon, M. Marinica, J. Perlado, and J. Marian. Assessment of interatomic potentials for atomistic analysis of static and dynamic properties of screw dislocations in W. Journal of Physics: Condensed Matter, 25(8) :085702, 2013.
  • Franciosi P. (2013), Transversally isotropic magneto-elasto-elastic composites with co-(dis)continouous phases, Int. J. Solids Structures 50 : 1013-1031.
  • Gérard, C., Cailletaud, G., Bacroix, B. (2013), Modeling of latent hardening produced by complex loading paths in FCC alloys, Int. J. Plasticity, 42 : 194-212.
  • Jedrychowski, M., Tarasiuk, J., Bacroix, B., Wronski S. (2013), Electron backscatter diffraction investigation of local misorientations and orientation gradients in connection with evolution of grain boundary structures in deformed and annealed zirconium. A new approach in grain boundary analysis, J. Applied Crystallography 46 : 483-492
  • Kahloun, C., Le, L. T., Monnet, G., Chavanne, M.-H., Ait, E., Franciosi P. (2013), Topological analysis of 110 slip in an -iron crystal from in situ atomic force microscopy, Acta Materialia, 61 : 6453-6465.
  • Le, L. T., Franciosi, P. (2013), Expectable specific features of BCC crystal plastic flow and consistency with the Schmid law, Philosophical Magazine 93 : 3589-3611.
  • Phung N.L., N. Marti, A. Blanche, N. Ranc, V. Favier, A. Chrysochoos, N. Saintier, F. Grégori, B. Bacroix, G. Thoquenne (2013), Very High Cycle Fatigue for Single Phase Ductile Materials: Slip Band Appearance Criterion. Procedia Engineering, 66, pp. 615–625.
  • Wronski, S., Tarasiuk, J., Bacroix, B., Wierzbanowski, K., Paul, H. (2013), Microstructure heterogeneity after the ECAP process and its influence on recrystallization in aluminium, Materials Characterization 78 : 60-68.


  • Bacroix, B., Brenner R. (2012). “A phenomenological anisotropic description for dislocation storage and recovery processes in fcc crystals.” Computational Materials Science 54: 97-100.
  • Bravo-Castillero, J., Guinovart-Díaz, R., Rodríguez-Ramos, R., Sabina, F. J., Brenner, R. (2012). “Unified analytical formulae for the effective properties of periodic fibrous composites.” Materials Letters 73(0): 68-71.
  • Bravo-Castillero, J., R. Rodriguez-Ramos, et al. Bravo-Castillero, J., Rodriguez-Ramos, R., Guinovart-Diaz, R., Mechkour, H., Brenner, R.,, Camacho-Montes, H. Sabina, F. J. (2012). “Universal Relations and Effective Coefficients of Magneto-Electro-Elastic Perforated Structures.” Quarterly Journal of Mechanics and Applied Mathematics 65(1): 61-85.
  • Bouvier, S., Benmhenni, N., Tirry, W., Gregori, F., Nixon, M. E., Cazacu, O., Rabet, L. (2012). “Hardening in relation with microstructure evolution of high purity α-titanium deformed under monotonic and cyclic simple shear loadings at room temperature.” Materials Science and Engineering: A 535(0): 12-21.
  • Charles, Y., M. Gaspérini, Disachi, M., Jouinot, P. (2012). “Numerical modelling of the Disk Pressure Test up to failure under gaseous hydrogen.” Journal of Materials and Processing Technology, 212(8): 1761-1770.
  • Dirras, G., Chauveau, T., Abdul-Latif, A., Gubicza, J., Ramtani, S., Bui, Q., Hegedus, Z., Bacroix, B. (2012). “Ultrafine-Grained Aluminum Processed by a Combination of Hot Isostatic Pressing and Dynamic Plastic Deformation: Microstructure and Mechanical Properties.” Metallurgical and Materials Transactions A 43A(4): 1312-1322.
  • Franciosi, P. (2012), “Laminate system schemes for effective property estimates of architectured composites with co-(dis)continuous phases." Mechanics Research Communications, 45: 70-76.
  • Franciosi P. (2012), A microstructure-based multi-laminate approach of polycrystal plasticity”, Procedia IUTAM , Symposium on Linking Scales in Computations, v3, pp141-156.
  • Gérard, C., Cailletaud, G., Bacroix, B. (2012), “Modeling of latent hardening produced by complex loading paths in FCC alloys, Int. J. of Plasticity, Corrected Proof, Available online.
  • Halloumi A., Desrayaud Ch., Bacroix B., Rauch E., Montheillet F. (2012), “A simple analytical model of asymmetric rolling”, Archives Metall. Mater., 57: 425- 435.
  • Kang, J.-Y., Bacroix, B., Brenner, R. (2012). “Evolution of microstructure and texture during planar simple shear of magnesium alloy.” Scripta Materialia 66(9): 654-657.
  • Le Bourlot, C., Landois, P., Djaziri, S., Renault, P. O., Le Bourhis, E. , Goudeau, P., Pinault, M., Mayne-L’Hermite, M., Bacroix, B., Faurie, D., Castelnau, O., Launois, P., Rouziere, S. (2012). “Synchrotron X-ray diffraction experiments with a prototype hybrid pixel detector.” Journal of Applied Crystallography 45: 38-47.
  • Masson R., R. Brenner, O. Castelnau, Incremental homogenization approach for ageing viscoelastic polycrystals", C. R. Mécanique, 340, p378-386, 2012
  • Vu, Q. H., Brenner, R., Castelnau, O., Moulinec, H., Suquet P. (2012). “A self-consistent estmiate for linear viscoelastic polycrystals with internal variables inferred from the collocation method.” Modelling and Simulation in Materials Science and Engineering 20: 024003.
  • Wroński S., Tarasiuk J., Bacroix B., Baczmański A., Braham C. (2012), “Investigation of plastic deformation heterogeneities in duplex steel by EBSD”, Materials Characterization, 73: 52-60.


  • Bacroix, B., Lahmari, M., Inglebert, G., Caron, I. L. (2011). “A modified oxygen boost diffusion treatment for Ti alloys and associated tribological properties with respect to biological environment.” Wear 271(11-12): 2720-2727.
  • Baczmanski, A., Le Joncour, L., Panicaud, B., François, M., Braham, C., Paradowska, A. M., Wronski, S., Amara, S., Chiron, R., (2011). “Neutron time-of-flight diffraction used to study aged duplex stainless steel at small and large deformation until sample fracture.” Journal of Applied Crystallography 44: 966-982.
  • Badji, R., Bacroix, B., Bouabdallah, M., (2011). “Texture, microstructure and anisotropic properties in annealed 2205 duplex stainless steel welds.” Materials Characterization 62(9): 833-843.
  • Belkhabbaz, A., Brenner, R., Rupin, N., Bacroix, B., Fonseca, J., (2011). “Prediction of the overall behavior of a 3D microstructure of austenitic steel by using FFT numerical scheme.” Procedia Engineering 10(0): 1883-1888.
  • Faurie, D., Renault, P. O., Le Bourhis, E., Chauveau, T., Castelnau, O., Goudeau, P., (2011). “X-ray strain analysis of 111 fiber-textured thin films independent of grain-interaction models.” Journal of Applied Crystallography 44: 409-413.
  • Franciosi, P., Brenner, R., El Omri, A., (2011). “Effective property estimates for heterogeneous materials with cocontinuous phases” Journal of Mechanics of Materials and Structures 6(5): 729-763.
  • Franciosi, P. and A. El Omri (2011). “Effective properties of fiber and platelet systems and related phase arrangements in n-phase heterogenous media.” Mechanics Research Communications 38(1): 38-44.
  • Le Bourhis, E., Faurie, D., Renault, P. O., Geandier, G., Thiaudiere, D., Castelnau, O., Goudeau, P., (2011). “X-ray elastic response of metallic thin film supported by polyimide substrates.” Journal of Strain Analysis for Engineering Design 46(7): 639-649.
  • Rekik, A. and R. Brenner (2011). “Optimization of the collocation inversion method for the linear viscoelastic homogenization.” Mechanics Research Communications 38(4): 305-308.
  • Sar, B.E., Charles, Y., Jouinot, P., Gasperini, M. (2011). “Simulation numérique de la fissuration assistée par l’hydrogène de « l’essai de disque ».” Matériaux & Techniques 99(1): 141-144.
  • Vu, Q. H., Brenner, R., Castelnau, O., Moulinec, H. (2011). “Effective behaviour of viscoelastic polycrystals and associated local fields inferred from homogenization: Incremental collocation approach.” Procedia Engineering 10(0): 177-182.
  • Wierzbanowski, K., Wronski, M., Baczmanski, A., Bacroix, B., Lipinski, P., Lodini, A., (2011). “Problem of lattice rotation due to plastic deformation. Example of rolling of F.C.C. materials.” Archives of Metallurgy and Materials 56(3): 575-584.
  • Wronski, S., Ghilianu, B., Chauveau, T., Bacroix, B. (2011). “Analysis of textures heterogeneity in cold and warm asymmetrically rolled aluminium.” Materials Characterization 62(1): 22-34.
  • Yoshida, K., Brenner, R., Bacroix, B., Bouvier, S. (2011). “Micromechanical modeling of the work-hardening behavior of single- and dual-phase steels under two-stage loading paths.” Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 528(3): 1037-1046.


  • Bacroix, B., Tarasiuk, J., Wierzbanowski, K., Zhu, K. Y. (2010). “Misorientations in rolled and recrystallized zirconium compared with random distribution. A new scheme of misorientation analysis.” Journal of Applied Crystallography 43: 134-139.
  • Brenner, R. (2010). “Computational approach for composite materials with coupled constitutive laws.” Zeitschrift Fur Angewandte Mathematik und Physik 61(5): 919-927.
  • Brenner, R. and J. Bravo-Castillero (2010). “Response of multiferroic composites inferred from a fast-Fourier-transform-based numerical scheme.” Smart Materials & Structures 19(11): 115004.
  • Charles, Y., Estevez, R., Bréchet, Y., Maire, E. (2010). “Modelling the competition between interface debonding and particle fracture using a plastic strain dependent cohesive zone.” Engineering Fracture Mechanics 77(4): 705-718.
  • Djaziri, S., Thiaudiere, D., Geandier, G., Renault, P. O., Le Bourhis, E., Goudeau, P., Castelnau, O., Faurie, D. (2010). “Controlled biaxial deformation of nanostructured W/Cu thin films studied by X-ray diffraction.” Surface & Coatings Technology 205(5): 1420-1425.
  • Faurie, D., Djemia, P., Le Bourhis, E., Renault, P. O., Roussigne, Y., Cherif, S. M., Brenner, R., Castelnau, O., Patriarche, G., Goudeau, P. (2010). “Elastic anisotropy of polycrystalline Au films: Modeling and respective contributions of X-ray diffraction, nanoindentation and Brillouin light scattering.” Acta Materialia 58(15): 4998-5008.
  • Franciosi, P. (2010). “The boundary-due terms in the Green operator of inclusion patterns from distant to contact and to connected situations using radon transforms: Illustration for spheroid alignments in isotropic media.” International Journal of Solids and Structures 47(2): 304-319.
  • Geandier, G., Renault, P. O., Le Bourhis, E., Goudeau, P., Faurie, D., Le Bourlot, C., Djemia, P., Castelnau, O., Cherif, S. M. (2010). “Elastic-strain distribution in metallic film-polymer substrate composites.” Applied Physics Letters 96(4).
  • Geandier, G., Thiaudière, D., Randriamazaoro, R. N., Chiron, R., Djaziri, S., Lamongie, B., Diot, Y., Le Bourhis, E., Renault, P. O., Goudeau, P., Bouaffad, A., Castelnau, O., Faurie, D., Hild, F. (2010). “Development of a synchrotron biaxial tensile device for in situ characterization of thin films mechanical response.” Review of Scientific Instruments 81(10).
  • Golebiowski, B., Swiatnicki, W. A., Gaspérini, M. (2010). “Microstructural changes induced near crack tip during corrosion fatigue tests in austenitic-ferritic steel.” Journal of Microscopy-Oxford 237(3): 352-358.
  • Hélary, G., Noirclère, F., Mayingi, J., Bacroix, B., Migonney, V. (2010). “A bioactive polymer grafted on titanium oxide layer obtained by electrochemical oxidation. Improvement of cell response.” Journal of Materials Science-Materials in Medicine 21(2): 655-663.
  • Kahloun, C., Badji, R., Bacroix, B., Bouabdallah, M. (2010). “Contribution to crystallographic slip assessment by means of topographic measurements achieved with atomic force microscopy.” Materials Characterization 61(9): 835-844.
  • Le Joncour, L., Panicaud, B., Baczmanski, A., Francois, M., Braham, C., Paradowska, A., Wronski, S., Chiron, R. (2010). “Damage in duplex steels studied at mesoscopic and macroscopic scales.” Mechanics of Materials 42(12): 1048-1063.
  • Lebensohn, R. A., Hartley, C. S., Tomé, C. N., Castelnau, O. (2010). “Modeling the mechanical response of polycrystals deforming by climb and glide.” Philosophical Magazine 90(5): 567-583.
  • Luis, C., Gaspérini, M., Chauveau, T. (2010). “Through thickness microstructural investigation of temper rolled ferritic steels for packaging applications.” Journal of Advanced Materials Research 89-91: 73-78.
  • Tirry, W., Coghe, F., Bouvier, S., Gasperini, M., Rabet, L., Schryvers, D. (2010). “A multi-scale characterization of deformation twins in Ti6Al4V sheet material deformed by simple shear.” Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 527(16-17): 4136-4145.
  • Zerr, A., Chigarev, N. , Brenner, R., Dzivenko, D. A., Gusev, V. (2010). “Elastic moduli of hard c-Zr(3)N(4) from laser ultrasonic measurements.” Physica Status Solidi-Rapid Research Letters 4(12): 353-355.


  • Brenner, R. (2009). “Numerical computation of the response of piezoelectric composites using Fourier transform.” Physical Review B 79(18): 184106.
  • Brenner, R., Lebensohn, R. A., Castelnau, O. (2009). “Elastic anisotropy and yield surface estimates of polycrystals.” International Journal of Solids and Structures 46(16): 3018-3026.
  • Castelnau, O., Blackman, D. K., Becker, T. W. (2009). “Numerical simulations of texture development and associated rheological anisotropy in regions of complex mantle flow.” Geophysical Research Letters 36.
  • Dirras, G., Bouvier, S., Gubicza, J., Hasni, B., Szilágyi, T. (2009). “Mechanical characteristics under monotonic and cyclic simple shear of spark plasma sintered ultrafine-grained nickel.” Materials Science and Engineering: A 526(1–2): 201-210.
  • Dournaux, J. L., Bouvier, S., Aouafi, A., Vacher, P. (2009). “Full-field measurement technique and its application to the analysis of materials behaviour under plane strain mode.” Materials Science and Engineering: A 500(1–2): 47-62.
  • Faurie, D., Castelnau, O., Brenner, R., Renault, P. O., Le Bourhis, E., Goudeau, P. (2009). “In situ diffraction strain analysis of elastically deformed polycrystalline thin films, and micromechanical interpretation.” Journal of Applied Crystallography 42: 1073-1084.
  • Gérard, C., Bacroix, B., Bornert, M., Cailletaud, G., Crépin, J., Leclercq, S (2009). “Hardening description for FCC materials under complex loading paths.” Computational Materials Science 45(3): 751-755.
  • Luis, C., Gaspérini, M., Bouvier, S., Li, J. J. (2009). “Effect of temper rolling on the mechanical behaviour of thin steel sheets under monotonous and reverse simple shear tests.” International Journal of Material Forming 2(SUPPL. 1): 471-474.
  • Rabahallah, M., Balan, T., Bouvier, S., Bacroix, B., Barlat, F., Chung, K., Teodosiu, C. (2009). “Parameter identification of advanced plastic strain rate potentials and impact on plastic anisotropy prediction.” International Journal of Plasticity 25(3): 491-512.
  • Rabahallah, M., Balan, T., Bouvier, S., Teodosiu, C., (2009). “Time integration scheme for elastoplastic models based on anisotropic strain-rate potentials.” International Journal for Numerical Methods in Engineering 80(3): 381-402.
  • Rabahallah, M., Bouvier, S., Balan, T., Bacroix, B., “Numerical simulation of sheet metal forming using anisotropic strain-rate potentials.” Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 517(1-2): 261-275.
  • Wronski, S., Wierzbanowski, K., Bacroix, B., Chauveau, T., Wrobel, M., Rauch, A., Montheillet, F., Wronski, M., “Texture heterogeneity of asymmetrically cold rolled low carbon steel” Archives of Metallurgy and Materials 54(1): 89-102.
  • Yoshida, K., Brenner, R., Bacroix, B., Bouvier, S. (2009). “Effect of regularization of Schmid law on self-consistent estimates for rate-independent plasticity of polycrystals.” European Journal of Mechanics a-Solids 28(5): 905-915.
  • Zhu, K. Y., Bacroix, B., Chauveau, T., Chaubet, D., Castelnau, O. (2009). “Texture Evolution and Associated Nucleation and Growth Mechanisms during Annealing of a Zr Alloy.” Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 40A(10): 2423-2434.


  • Badji, R., Bouabdallah, M., Bacroix, B., Kahloun, C., Belkessa, B., Maza, H. (2008). “Phase transformation and mechanical behavior in annealed 2205 duplex stainless steel welds.” Materials Characterization 59(4): 447-453.
  • Badji, R., Bouabdallah, M., Bacroix, B., Kahloun, C., Bettahar, K., Kherrouba, N. (2008). “Effect of solution treatment temperature on the precipitation kinetic of sigma-phase in 2205 duplex stainless steel welds.” Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 496(1-2): 447-454.
  • Belhabib, S., Haddadi, H., Gaspérini, M., Vacher, P. (2008). “Heterogeneous tensile test on elastoplastic metallic sheets: Comparison between FEM simulations and full-field strain measurements.” International Journal of Mechanical Sciences 50(1): 14-21.
  • Castelnau, O., Blackman, D. K., Lebensohn, R. A., Castaneda, P. P. (2008). “Micromechanical modeling of the viscoplastic behavior of olivine.” Journal of Geophysical Research-Solid Earth 113(B9).
  • Castelnau, O., Duval, P., Montagnat, M., Brenner, R. (2008). “Elastoviscoplastic micromechanical modeling of the transient creep of ice.” Journal of Geophysical Research-Solid Earth 113(B11).
  • Duchêne, L., Lelotte, T., Flores, P., Bouvier, S., Habraken, A. M. (2008). “Rotation of axes for anisotropic metal in FEM simulations.” International Journal of Plasticity 24(3): 397-427.
  • Franciosi, P. and S. Berbenni (2008). “Multi-laminate plastic-strain organization for non-uniform TFA modeling of poly-crystal regularized plastic flow.” International Journal of Plasticity 24(9): 1549-1580.
  • Hama, T., Nagata, T., Teodosiu, C. Makinouchi, A., Takuda, H. (2008). “Finite-element simulation of springback in sheet metal forming using local interpolation for tool surfaces.” International Journal of Mechanical Sciences 50(2): 175-192.
  • Karlsen, M., Hjelen, J., Grong, O., Rorvik, G., Chiron, R., Schubert, U., Nilsen, E. (2008). “SEM/EBSD based in situ studies of deformation induced phase transformations in supermartensitic stainless steels.” Materials Science and Technology 24(1): 64-72.
  • Lebensohn, R. A., Brenner, R., Castelnau, O., Rollett, A. D. (2008). “Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper.” Acta Materialia 56(15): 3914-3926.
  • Mayingi, J., Hélary, G., Noirclère, F., Bacroix, B., Migonney, V. (2008). “Grafting of bioactive polymers onto titanium surfaces and human osteoblasts response.” Irbm 29(1): 1-6.
  • Piekos, K., Tarasiuk, J., Wierzbanowski, K., Bacroix, B. (2008). “Generalized vertex model of recrystallization - Application to polycrystalline copper.” Computational Materials Science 42(4): 584-594.
  • Piekos, K., Tarasiuk, J., Wierzbanowski, K., Bacroix, B. (2008). “Stochastic vertex model of recrystallization.” Computational Materials Science 42(1): 36-42.


  • Baczmański, A., Wierzbanowski, K., Lipiński, P., Bacroix, B., Lodini, A. (2007). “Residual stresses, dislocation density and recrystallization process‖.” Journal of Neutron Research 15(3-4): 281-287.
  • Cabus, C., Réglé, H., Bacroix, B. (2007). “Orientation relationship between austenite and bainite in a multiphased steel.” Materials Characterization 58(4): 332-338.
  • Cao, W. Q., Dirras, G. F., Benyoucef, M., Bacroix, B. (2007). “Room temperature deformation mechanisms in ultrafine-grained materials processed by hot isostatic pressing.” Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 462(1-2): 100-105.
  • Castelnau, O., Geandier, G., Renault, P. O., Goudeau, P., Le Bourhis, E. (2007). “Characterization and modelling of the elastic properties of nano-structured W/Cu multilayers.” Thin Solid Films 516(2-4): 320-324.
  • Franciosi, P. and S. Berbenni (2007). “Heterogeneous crystal and poly-crystal plasticity modeling from a transformation field analysis within a regularized Schmid law.” Journal of the Mechanics and Physics of Solids 55(11): 2265-2299.
  • Gubicza, J., Dirras, G., Szommer, P., Bacroix, B. (2007). “Microstructure and yield strength of ultrafine grained aluminum processed by hot isostatic pressing.” Materials Science and Engineering: A 458(1–2): 385-390.
  • Kang, J. Y., Bacroix, B., Réglé, H., Oh, K. H., Lee, H. C., (2007). “Effect of deformation mode and grain orientation on misorientation development in a body-centered cubic steel.” Acta Materialia 55(15): 4935-4946.
  • Kim, D., Barlat, F., Bouvier, S., Rabahallah, M., Balan, T., Chung, K. (2007). “Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate.” International Journal of Plasticity 23(8): 1380-1399.
  • Mishra, A., Kad, B. K., Gregori, F., Meyers, M. A. (2007). “Erratum to “Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis” [Acta Mater 55 (2007) 13–28].” Acta Materialia 55(7): 2563-2564.
  • Mishra, A., Kad, B. K., Gregori, F., Meyers, M. A. (2007). “Microstructural evolution in copper subjected to severe plastic deformation: Experiments and analysis.” Acta Materialia 55(1): 13-28.
  • Ohura, K., Sun, Z., Makinouchi, A., Teodosiu, C. (2007). “Volume-CAD: An integrated environment for virtual manufacturing and structural analysis.” Advanced Materials Research 23: 17-24.
  • Ungar, T., Castelnau, O., Ribarik, G.,Drakopoulos, M., Béchade, J. L., Chauveau, T., Snigirev, A., Snigireva, I., Schroer, C., Bacroix, B. (2007). “Grain to grain slip activity in plastically deformed Zr determined by X-ray micro-diffraction line profile analysis.” Acta Materialia 55(3): 1117-1127.